What Must Be Settled Before Melamine Kitchen Cabinets Go to Fabrication in Selangor?

Does the 3D view match a dimensioned plan?

Ask to see a plan and elevations with the length of each wall run, cabinet heights and depths, and the positions of fixed features such as windows, columns and service points. A perspective view helps you picture the overall look, but it can hide where a run ends or how much space a filler takes.

Take a 2,990 mm wall run. Five nominal 600 mm cabinets add up to 3,000 mm, so the drawing needs to show how that 10 mm difference is handled. Ask whether the dimensions use the finished floor and wall surfaces, and whether fillers or finished end panels are included in the drawing.

Future Kitch offers layout planning and 3D drawings as part of its cabinet process. Ask which dimensioned plan sits behind the visual and which version you should approve.

• Check each wall run, cabinet height and cabinet depth.
• Look for windows, columns and service points that affect the layout.
• Confirm how fillers and visible end panels are shown.

What does each payment stage mean?

Ask the provider to write down the amount or percentage due at each stage and what triggers it. “Deposit, then balance” is too vague on its own. A useful schedule names the event attached to each payment, such as order confirmation, approval of the final drawing or completion of installation.

Also ask how a change affects the price and timing before you agree to it. For example, changing a 600 mm hinged-door cabinet to a drawer unit can add different hardware and assembly work. A clear answer gives you a revised amount and any timing change before the alteration moves forward.

Compare payment schedules against the same scope. If one proposal ties a payment to drawing approval and another ties it to fabrication, ask what each milestone means in practice; otherwise, the percentages alone won’t tell you how the orders differ.

• Amount or percentage due at each stage.
• The specific event that triggers each payment.
• How cost and timing changes are recorded when the plan changes.

Which drawing revision will production follow?

Ask how you and the provider will identify the approved version. A revision number and date on the drawing, matched to the order paperwork, make it easier to spot an outdated plan. Keep that copy with the quotation and any later written changes.

For example, if a 2,400 mm base run changes from hinged doors to a drawer arrangement, the front layout and hardware change too. Ask for the change to appear on an updated drawing, and check that you receive any revised cost or timing before giving approval.

Future Kitch has its own manufacturing factory. Ask how the approved drawing reference is carried into the production paperwork and how later changes are recorded.

When does the installation window start?

Ask which milestone starts the quoted lead time: deposit, final measurement, material selection or approval of the drawing. An estimate is hard to compare if one provider starts counting at deposit and another starts after the plan is approved.

Then ask what needs to be ready on site. A measurement taken before the floor is finished may not account for its final level; a late change to a tiled wall can affect the cabinet run. Confirm whether installers need the room cleared and whether plumbing and electrical points must be in their final positions before fitting begins.

A good answer names the start event, gives a project-specific installation window and identifies decisions that could move it. If other renovation trades are still working in the kitchen, ask how their sequence fits around cabinet installation so the room is ready when the team arrives.

Frequently asked questions